UEFI is a standard firmware interface designed to replace BIOS. Mellanox UEFI Network driver is compliant with UEFI specification version 2.6 and allows boot over network via PXE (Preboot eXecution Enviroment). This network driver allows remote boot over InfiniBand or Ethernet, or Boot over iSCSI (Bo-iSCSI) in UEFI mode, and also supports the SecureBoot standard.
The UEFI Network driver allows IT managers the flexibility to deploy servers with a single adapter card into InfiniBand or Ethernet networks while also enabling booting from LAN or remote storage targets. In addition to boot capabilities, Mellanox UEFI Network driver provides firmware management and diagnostic protocols compliant with the UEFI specification.
Note: UEFI is now available on internal flash memory with upgrade to newer firmware image. You may enable UEFI boot with a simple field configuration.
Supported Mellanox HCA Devices and Firmware
- ConnectX®-4: v12.28.1002
- ConnectX®-4 Lx: v14.28.1002
- ConnectX®-5/ ConnectX®-5 Ex: v16.28.1002
- ConnectX®-6: v20.28.1002
- ConnectX®-6 Dx: v22.28.1002
- ConnectX®-6 Lx: v26.28.1002
- BlueField: v18.27.2008
Note: Burning the UEFI driver using the UEFI driver above, will remove the Flexboot driver (Legacy BIOS driver) from the firmware.